夯錘連接套#4804818

夯錘的工作原理：夯錘由偏心軸驅動，實現上下運動，從而壓緊熨平板下方的材料。為了獲得更高的預壓實度，應該根據特定的層厚和攤鋪速度正確的設置夯錘。
強夯法即強力夯實法，又稱動力固結法。是利用大型履帶式強夯機將8-30噸的重錘從6-30米高度自由落下，對土進行強力夯實，迅速提高地基的承載力及壓縮模量，形成比較均勻的、密實的地基，在地基一定深度內改變了地基土的孔隙分布。
強夯法施工已廣泛運用到高速公路鐵路，機場、核電站、大工業區、港口填海等基礎加固工程。優點工期短、效果好、造價低。

免責聲明丨 部分內容來源網絡！本文僅供交流學習 , 版權歸屬原作者，部分圖片、內容推送時未能及時與原作者取得聯系，若來源標注錯誤或侵犯到您的權益煩請告知，我們將立即刪除.

企業介紹 

公司供應攤鋪機配件，壓路機配件，銑刨機配件，攤鋪機刮板驅動軸，刮板驅動軸總成，找平儀，找平儀支架以及液壓泵和配件。我廠還供應攤鋪機易損件，攤鋪機平衡梁，攪龍軸，踏板，輸料底板，葉片，熨平板，減速機，鏈軌，履帶板，支重輪，刮板大鏈條，輸料鏈條等。

聯系人：梁經理

 

 

聯系方式：13645201509（微信同號）

QQ：2870202745

 

The working principle of the rammer: The rammer is driven by an eccentric shaft to achieve up and down movement, thereby compressing the material below the ironing plate. In order to achieve higher pre compaction, the rammer should be set correctly based on specific layer thickness and paving speed.

The dynamic compaction method is also known as the dynamic consolidation method. It uses a large tracked dynamic compactor to freely drop an 8-30 ton heavy hammer from a height of 6-30 meters to compact the soil, rapidly improving the bearing capacity and compressive modulus of the foundation, forming a relatively uniform and dense foundation, and changing the pore distribution of the foundation soil within a certain depth.

The dynamic compaction method has been widely used in foundation reinforcement projects such as highways, railways, airports, nuclear power plants, large industrial areas, and port reclamation. Advantages: Short construction period, good effect, and low cost.

Disclaimer | Part of the content comes from the internet! This article is for communication and learning purposes only. The copyright belongs to the original author. Some images and content were not promptly communicated to the original author during push notifications. If the source labeling is incorrect or infringes on your rights, please inform us and we will immediately delete it

Enterprise Introduction

The company supplies paver accessories, roller accessories, milling machine accessories, paver scraper drive shaft, scraper drive shaft assembly, leveling instrument, leveling instrument bracket, hydraulic pump and accessories. Our factory also provides vulnerable parts for pavers, balance beams for pavers, auger shafts, pedals, conveying soleplates, blades, ironing plates, reducers, chain tracks, track shoes, supporting wheels, scraper chains, conveying chains, etc.

Contact person: Manager Liang

Contact information: 13645201509 (same WeChat account)

QQ: 2870202745