產品描述

攤鋪機找平儀找平原理，在攤鋪作業時，熨平板通過兩側牽引大臂由主機牽引進行攤鋪,熨平板處于浮動狀態,這種浮動式熨平板對路基不平整有初步的濾波和滯后效應，具有一定的調平功能,但它只能消除波長較短的凸凹不平，當攤鋪機安裝上自動找平系統后,調平裝置的傳感器檢測出攤鋪機因道路不平與基準平面的偏差，然后由處理器將該偏差信號進行放大、運算、比較、處理,并及時發出脈沖調節信號作用于相應原電磁閥,控制牽引大臂調節油缸升降,從而自動調整牽引大臂牽引點的垂直高度的變化。

免責聲明丨 部分內容來源網絡！本文僅供交流學習 , 版權歸屬原作者，部分圖片、內容推送時未能及時與原作者取得聯系，若來源標注錯誤或侵犯到您的權益煩請告知，我們將立即刪除.

QQ郵箱：2870202745@qq.com

網易郵箱：LS13645201509@163.com

Leveling principle of paver leveling instrument: during the paving operation, the screed is pulled by the host through the traction boom on both sides to pave, and the screed is in floating state. This floating screed has a preliminary filtering and hysteresis effect on the subgrade unevenness, and has a certain leveling function, but it can only eliminate the roughness with short wavelength. When the paver is installed with the automatic leveling system, the sensor of the leveling device detects the deviation of the paver from the reference plane due to the uneven road, and then the processor amplifies, calculates, compares, and processes the deviation signal, and sends a pulse regulating signal to act on the corresponding original solenoid valve in time to control the lifting of the traction boom regulating cylinder, so as to automatically adjust the traction boom Change in the vertical height of the towing point.

Disclaimer | Part of the content is sourced from the internet! This article is for communication and learning purposes only, and the copyright belongs to the original author. Some images and content were not promptly communicated to the original author. If the source labeling is incorrect or infringes on your rights, please inform us and we will immediately delete it

Enterprise Introduction

The company supplies paver accessories, roller accessories, milling machine accessories, paver scraper drive shaft, scraper drive shaft assembly, leveling instrument, leveling instrument bracket, hydraulic pump and accessories. Our factory also supplies vulnerable parts for pavers, balance beams, agitator shafts, pedals, feeding soleplates, blades, ironing plates, reducers, chain tracks, track shoes, supporting wheels, scraper chains, feeding chains, etc.

Contact person: Manager Liang

Contact information: 13645201509

(Same WeChat account)

QQ: 2870202745

QQ email: 2870202745@qq.com

NetEase email: ls13645201509@163.com