產品描述

氣加熱系統使用燃燒液化氣來加熱熨平板底板，通過底板傳熱的方式來加熱振搗梁，壓實梁。液化氣經減壓閥送到各個噴火嘴，用點火器將各個噴火嘴點燃，所以在燃燒室內產生熱量加熱底板，達到熨平板加熱的目的。氣加熱擁有加熱不均勻，加熱速度慢且易產生局部過熱而使底板產生退火降低耐磨性等缺點，但是氣加熱擁有成本低廉，易改制等優點而廣泛使用。

免責聲明丨 部分內容來源網絡！本文僅供交流學習 , 版權歸屬原作者，部分圖片、內容推送時未能及時與原作者取得聯系，若來源標注錯誤或侵犯到您的權益煩請告知，我們將立即刪除.

QQ郵箱：2870202745@qq.com

The gas heating system uses burning liquefied gas to heat the screed bottom plate, heat the vibrating beam and compact the beam through the bottom plate heat transfer. The liquefied gas is sent to each nozzle through the pressure reducing valve and ignited by the igniter, so heat is generated in the combustion chamber to heat the bottom plate to achieve the purpose of heating the screed. Gas heating has the disadvantages of uneven heating, slow heating speed and easy to produce local overheating, which will cause annealing of the bottom plate and reduce wear resistance. However, gas heating has the advantages of low cost and easy to be modified and is widely used.

Disclaimer | Part of the content comes from the network! This article is only for exchange and learning. The copyright belongs to the original author. Some pictures and content are not timely contacted with the original author when being pushed. If the source label is incorrect or infringes your rights and interests, please inform us and we will delete it immediately

QQ Email: 2870202745@qq.com